User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Painting the body and neck
- 3.2 Mounting the tuners
- 3.3 Mounting the neck of the guitar
- 3.4 Wiring the potentiometers, pickups and switch
- 3.5 Mounting the pickguard
- 3.6 Mounting the tailpiece and bridge
- 3.7 Mounting the potentiometer knobs and strap buttons
- 3.8 Strings, neck relief and the position of the strings
- 4 Protecting the environment
Wire the switch to the potentiometers as shown. Guide the switch from the back of
the body into the opening provided for it.
Place the plastic cover and a washer in place and fasten the switch with the nut pro‐
vided. The neck pickup is generally activated with the switch in the upper position,
and the bridge pickup in the lower position. This conguration can be changed at
any time simply by swapping the two connectors.
Assembly instructions
Electric Guitar Kit Single Cut
17