User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Painting the body and neck
- 3.2 Mounting the tuners
- 3.3 Mounting the neck of the guitar
- 3.4 Wiring the potentiometers, pickups and switch
- 3.5 Mounting the pickguard
- 3.6 Mounting the tailpiece and bridge
- 3.7 Mounting the potentiometer knobs and strap buttons
- 3.8 Strings, neck relief and the position of the strings
- 4 Protecting the environment
Thread the cable for the string earthing (after stripping the insulation, and without
the connector) through the channel from the opening in the back into the hole to
fasten the tailpiece.
Pull the cable far enough out of the hole that there will be suîš„cient contact with the
metallic surface when the tailpiece is installed. Earthing the strings reduces noise
(humming).
Assembly instructions
Electric Guitar Kit Single Cut
13