User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Painting the body and neck
- 3.2 Mounting the tuners
- 3.3 Mounting the neck of the guitar
- 3.4 Wiring the potentiometers, pickups and switch
- 3.5 Mounting the pickguard
- 3.6 Mounting the tailpiece and bridge
- 3.7 Mounting the potentiometer knobs and strap buttons
- 3.8 Strings, neck relief and the position of the strings
- 4 Protecting the environment
3.4 Wiring the potentiometers, pickups and switch
The pickups, potentiometer and jack socket are wired using connectors.
Insert the three connectors for the cable harness through the opening into the cable
channel in the back as shown in the pictures until they reach the opening for the
neck pickup, then from there further into the opening for the bridge pickup and from
there further into the opening for the switch.
Assembly instructions
Electric Guitar Kit Single Cut
11