User manual

3.8 Strings, neck relief and the position of the strings
The strings are threaded on the tailpiece and led over the bridge and the string
saddle. Thread the strings into the holes of the machine heads, wrap the end of the
string a few times around the peg, and then hand-tighten each string. Be sure the
individual strings are in the right position on the saddle.
Then tune each string in turn to the correct pitch. You can using a tuner or a pitch
pipe as a reference. Please note that the string tension will still drift and the guitar
will need to be retuned a few times before the strings are played in.
Stringing
Assembly instructions
22
Electric Guitar Kit DC Style
Electric Guitar Kit