User manual

3.3 Mounting the guitar neck
Place the body on a suitable work surface. Use a soft pad in order to avoid damage to
the surface. Insert the neck into the neck cutout. If necessary, use a sharp chisel or
sandpaper to adjust it. Be very careful when removing material. The neck should be
tight and never have too much clearance in the cutout!
Turn the guitar over, position the mounting plate over the four screw holes on the
back of the body and screw the four supplied long wood screws through the holes in
the mounting plate into the body and neck until the connection is rm.
Assembly instructions
10
Electric Guitar Kit DC Style
Electric Guitar Kit