User Manual Dynamic Compressor Effects pedal
Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 01.09.
Table of contents Table of contents 1 General information................................................................................................................................. 1.1 Further information........................................................................................................................... 1.2 Notational conventions.................................................................................................................... 1.3 Symbols and signal words.....
Dynamic Compressor Effects pedal
General information 1 General information This user manual contains important information on the safe operation of the device. Read and follow all safety notes and all instructions. Save this manual for future reference. Make sure that it is available to all persons using this device. If you sell the device to another user, be sure that they also receive this manual. Our products and user manuals are subject to a process of continuous development.
General information 1.1 Further information On our website (www.thomann.de) you will find lots of further information and details on the following points: Download This manual is also available as PDF file for you to download. Keyword search Use the search function in the electronic version to find the topics of interest for you quickly. Online guides Our online guides provide detailed information on technical basics and terms.
General information Letterings The letterings for connectors and controls are marked by square brackets and italics. Examples: [VOLUME] control, [Mono] button. 1.3 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this manual. Signal word Meaning DANGER! This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided.
Safety instructions 2 Safety instructions Intended use This device is intended to be used for sound processing of signals from musical instruments with electromagnetic pickups. Any other use or use under other operating conditions is con‐ sidered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use.
Safety instructions NOTICE! External power supply The device is powered by an external power supply. Before connecting the external power supply, ensure that the input voltage (AC outlet) matches the voltage rating of the device and that the AC outlet is protected by a residual current circuit breaker. Failure to do so could result in damage to the device and possibly the user.
Features 3 Features n n n n 10 Dynamic Compressor Effects pedal Effects pedal for electric guitars Compressor Sustain, Attack and Level controls Power supply via 9-V block battery or power adapter (both not included)
Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. Create all connections while the device is off. Use the shortest possible high-quality cables for all connections.
Installation and starting up Changing the battery To insert or change the battery, disconnect a possibly used power adapter from the mains socket. Turn the pedal over, press lightly on the battery compartment cover and slide it down‐ wards in the direction of the arrow. Remove the back cover. Insert/replace the 9-V block bat‐ tery paying attention to the polarity markings and place the cover again into its original posi‐ tion until it locks.
Connections and operating elements 5 Connections and operating elements # ö $ 1 [SUSTAIN] | with this control you can adjust how fast the compressor finishes the signal processing. 2 [DC 9V] | connection for the external power supply with 9 V DC. When an external power supply is used, the battery supply is cut off automatically. 3 [LEVEL] | turn this control clockwise to increase the output level.
Technical specifications 6 Technical specifications Input connections Power supply Socket for power adapter Instrument 1/4" jack socket Input impedance Output connections 500 kΩ Amp 1/4" jack socket Output impedance 10 kΩ Current consumption 8 mA Power supply External power adapter, 100 - 240 V Power adapter Secondary current 200 mA Secondary voltage 9V Polarity Centre negative Battery 9-V block battery Degree of protection IP20 Dimensions (W × H × D) 72 mm × 55 mm × 120 mm Wei
Technical specifications Ambient conditions Temperature range 0 °C…40 °C Relative humidity 20 %…80 % (non-condensing) Further information Effect type Compressor includes power supply no, optionally available (item no. 409939) includes battery no, optionally available (item no.
Protecting the environment 7 Protecting the environment Disposal of the packaging mate‐ rial For the transport and protective packaging, environmentally friendly materials have been chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are properly disposed of. Do not just dispose these materials with your normal household waste, but make sure that they are fed to a recovery. Please follow the notes and markings on the packaging.
Protecting the environment Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) in its currently valid version. Do not dispose with your normal household waste. Dispose this device through an approved waste disposal firm or through your local waste facility. When discarding the device, comply with the rules and regulations that apply in your country. If in doubt, consult your local waste disposal facility.
Notes 18 Dynamic Compressor Effects pedal
Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.
