Quick start guide

Thomann GmbH • Hans-Thomann-Straße 1 • 96138 Burgebrach • www.thomann.de • [e-mail] DocID: 521934_09.02.2022
Duality
Safety instructions
Intended use
This device is intended for use as eect pedal for electric guitars. Any other use or use
under other operating conditions is considered to be improper and may result in per-
sonal injury or property damage. No liability will be assumed for damages resulting
from improper use.
Danger for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are
not within reach of babies and young children. Choking hazard! Ensure
that children do not detach any small parts from the product. They could
swallow the pieces and choke!
Quick Start Guide
This quick start guide contains important information on the safe operation of the
product. Read and follow the safety advice and instructions given. Retain the quick
start guide for future reference. If you pass the product on to others please include
this quick start guide.
Where to use the product
Never use the product
• in conditions of extreme temperature or humidity
• in extremely dusty or dirty areas
• at locations where the unit can become wet
General handling
• To prevent damage, never use force when handling the product.
• Never immerse the product in water. Just wipe it with a clean dry cloth. Do not use
liquid cleaners such as benzene, thinners or ammable cleaning agents.
For the transport and protective packaging, environmentally friendly materials have been
chosen that can be supplied to normal recycling. Ensure that plastic bags, packaging, etc. are
properly disposed of. Do not just dispose of these materials with your normal household was-
te, but make sure that they are collected for recycling. Please follow the notes and markings on
the packaging.
This product is subject to the European Waste Electrical and Electronic Equipment Directive
(WEEE) in its currently valid version. Do not dispose of your old device with your normal house-
hold waste. Dispose of this product through an approved waste disposal rm or through your
local waste facility. Comply with the rules and regulations that apply in your country. If in doubt,
consult your local waste disposal facility.
EN
Features
• Dual eect pedal for electric guitars
• The eect modules A and B can be used simultaneously or individually and in any
order
• Digital Delay with three dierent Delay types (eect module A)
• Digital Reverb with three dierent modes (eect module B)
• True Bypass when device is powered o
• Buer Bypass when device is connected to power supply
• 3-way switch for eects order
• Foot switches with LED indicators
• Power supply via 9 V
power adapter (not included,
suitable optional power adapter: item no. 409939, no battery operation)
Reverb
B
Delay
A
DECAY TIME
A – B
B – A
A or B
MIX TONE LEVEL F.B
Studio Church Plate
DUALITY
BY
Analog Real Tape
# %$ö &
'
)
(
*
,
-
/
.
+
Operating elements
1 Studio/Church/Plate Switch for selecting the Reverb mode
Studio: Warm and natural room reverb
Church: Church reverb - wide, smooth, and natural
Plate: Studio style plate reverb
2 TONE Rotary control for adjusting the tone colour of the
Reverb eect
3 DC IN Socket for connecting a power adapter (not included)
4 LEVEL Rotary control for adjusting the volume level of the
Delay eect
5 Analog/Real/Tape Switch for selecting the Delay type
Analog: Classic analog delay eect with warm and smooth
tone
Real: Realistic and natural echo delay
Tape: Creates swirly 70’s tape echo
6 F.B Rotary control for adjusting the feedback of the Delay
eect
7 TIME Rotary control for adjusting the time value of the Delay
eect (5 ms ... 780 ms)
8 INPUT 1/4" jack socket for connecting instruments
9 Delay Foot switch for switching on/o the Delay eect
10 Reverb Foot switch for switching on/o the Reverb eect
11 OUTPUT 1/4" jack socket for connecting an amplier
12 DECAY Rotary control for adjusting the Decay time of the Reverb
eect
13 Switch for selecting the operation mode
A – B The Delay and Reverb eects can simultaneously be
enabled. The signal will go through the Delay eect and
then to the Reverb eect.
A or B Either the Delay eect or the Reverb eect can be
enabled.
B – A The Reverb and Delay eects can simultaneously be
enabled. The signal will go through the Reverb eect and
then to the Delay eect.
14 MIX Rotary control for adjusting the volume level of the
Reverb eect
Technical specications
• Input connections 1/4" jack socket
Socket for connecting a power adapter
• Output connections 1/4" jack socket
• Power supply External power adapter, 100 - 240 V ~ 50/60 Hz
• Power adapter Current draw 200 mA
Operating voltage 9 V
Polarity centre negative
• Dimensions (W × H × D) 95 mm × 37 mm × 120 mm
• Weight 322 g
• Ambient conditions Temperature range 0°C...40°C
Relative humidity 20%...80%
(non-condensing)