User manual

This setting decides, if the cabinet simulation synchronises with the ‘AMP’ module. If the func‐
tion is enables, the cabinet simulation synchronises automatically with the ‘AMP’ module
when the ‘AMP’ module is changed in the eects chain. The default setting is O.
1. Turn [1] or [2] to calibrate ‘PEDAL1’ (native pedal) or ‘PEDAL2’ (external pedal).
2. Select ‘HEEL’ and then press the Expression Pedal to the heel-down position to set the
minimum value.
3. Select ‘TOE’ and then press the Expression Pedal to the toe-down position to set the
maximum value.
4. Select ‘PRESS’ and then press the Expression Pedal heavily to the toe-down position.
ð
The pressure applied determines the pressure to enable or disable the Expression
Pedal. The external pedal cannot use this function.
‘PREAMP SYNC’
‘PEDAL CALIBRATE’
Operating
multi eects unit
50