User manual

6.6 Tuner
1. Press and hold the footswitch [D] for more than 2 seconds.
ð
The tuner is enabled.
2. Turn [1] to adjust the reference frequency (default value 440 Hz, range: 430 Hz…450 Hz).
3. Turn [2] to select between the modes ‘MUTE’ and ‘BYPASS’ (default setting ‘MUTE’ ).
4. Press any footswitch or [EXIT ] to quit tuner mode.
6.7 System settings
1. Press [MENU] to enter the system settings.
2. Turn [SELECT] to select the desired submenu.
ð
The rmware version of the device is displayed on the top right corner.
Operating
multi eects unit
48