User manual

6.4 Expression pedal

The unit has a native Expression Pedal ( ‘PEDAL1’ ) and supports an external pedal ( ‘PEDAL2’ )

using a 1/4" TRS jack cable (stereo). The LED [1] lights up blue when the native pedal is ena‐

bled. The LED [2] lights up blue when the external pedal is connected.

You need to calibrate the Expression Pedal before using it for the rst time (see

‘ ‘PEDAL

CALIBRATE’ ’ on page 50).

The ‘EXP’ function allows to control multiple parameters in dierent ranges through

dierent toe-down/heel-down positions.

The Expression Pedals can only adjust parameters, but not enable or disable eect

modules.

Operating

multi eects unit