User manual

This mode allows you to switch the amplier channels using one of the footswitches [A], [B] or
[C]. Connect the [AMP CTRL] socket of the unit to the footswitch socket of the amplier using a
1/4" TRS jack cable (stereo).
1. Press [3] to select ‘AMP CTRL’ .
ð
In the parameter area is shown ‘AMP CTRL’ . The background colour is green. The
footswitch LED lights up green.
2. Turn [1], [2] or [3] to select the modes [T+S], [R+S] or [T+R+S].
3. Press the relevant footswitch to switch the amplier channels.
Operating
multi eects unit
38