User manual

This mode allows you to set the delay time using one of the footswitches [A], [B] or [C].
1. Press [2] to select ‘TAP TEMPO’ .
ð
In the parameter area is shown ‘TAP TEMPO’ . The background colour is red. The foot‐
switch LED ashes red. The default setting for ‘TAP TEMPO’ is 120 bpm.
2. Select a ‘DELAY’ module and enable ‘TEMPO’ .
3. Press repeatedly the relevant footswitch to change the speed.
ð
The footswitch LED ashes according to the current speed (bpm).
Respect possible notices in your amplier user manual before using this function to
avoid damage.
Mode ‘TAP TEMPO’
Mode ‘AMP CTRL’
Operating
DNAfx GiT Pro
37