User manual

This mode allows you to assign an eect module to one of the footswitches [A], [B] or [C], with
which you can then enable or disable the eect module. By default, the eect modules are dis‐
abled, the footswitch LED is o.
1. Press [1] to select ‘STOMPBOX’ .
2. Turn [1], [2] or [3] to select the eect modules for the footswitches [A], [B] or [C].
ð
In the parameter area is shown the name of the eect module. The background
colour is the same as that in the eects chain.
3. Press the footswitches [A], [B] or [C] to enable or disable the relevant eect module.
ð
The relevant footswitch LED lights up blue when the eect module is enabled and is
o when the eect module is disabled.
Mode ‘STOMPBOX’
Operating
multi eects unit
36