User manual

2. Connect the RETURN interface of the amplier or an individual power amp to the output

socket (jack) [OUTPUT L] of the unit.

3. Connect a studio monitor, stage monitor, mixer or other FRFR device to the output

socket (jack) [OUTPUT R] or the output socket (XLR) [OUTPUT R] of the unit.

4. For the output with FRFR device, set output mode ‘CAB’ ( ‘CAB’ on).

5. For the output with an amplier, set output mode ‘THRU’ ( ‘CAB’ o).

Installation

DNAfx GiT Pro