User manual

This setup can be used, if the amplier does not have an FX LOOP. The unit is placed in front of
the amplier. The signal from the unit goes to the preamp of an amplier.
AUX IN
AMP CTRL PEDAL 2 INPUT
SEND
RETURN L RETURN R OUTPUT L
OUTPUT R
LIFT
GND
OUTPUT L OUTPUT R
MIDI IN/
MIDI OUT
USB
DC IN
9V 1A
Amplier
Guitar
1. Connect the guitar to the input socket [INPUT] of the unit.
2. Connect the input of the amplier to the output socket (jack) [OUTPUT L] of the unit.
3. Disable the eect modules ‘AMP’ and ‘CAB’ to avoid unexpected tone colouring.
Connection to the input socket
of the amplier
Installation
DNAfx GiT Pro
17