User manual

20 Housing fan
21 [OUTPUTS] | 2 × speaker outputs (Speaker Twist) to connect suitable speaker boxes. The overall impedance of the connected
load must not fall below 4 Ω.
22 [SEND] | 1/4" jack socket of the serial eects loop for connecting sound processors such as compressors, etc. The connection
can also be used as a line output, since the internal signal path is interrupted only by plugging a plug into the [RETURN]
input. The SEND signal is tapped behind the EQ.
23 [RETURN] | 1/4" jack input of the eects loop for returning the processed signal
24 [POWER] | IEC chassis plug for connecting the mains cable with fuse holder
25 Mains switch. Turns the device on and o.
Connections and operating elements
18
Block-800B
Bass Head