User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cut the headstock to size
- 3.2 Painting the body and neck
- 3.3 Mounting the tuners
- 3.4 Mounting the string retainer
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard
- 3.8 Mounting the bridge
- 3.9 Mounting the strap buttons
- 3.10 Strings, neck relief, string height and pickups
- 4 Protecting the environment
Connect the connector to the connector for the potentiometers and output jack
which is mounted on the pickguard.
3.7 Mounting the pickguard
First, adjust the width of the recess for the guitar neck on the pickguard with a
needle le and/or sandpaper. Then position the pickguard over the front of the body
so that the pickups and all the wires are seated in the correct recesses. Screw the
pickguard onto the body using the screws provided as shown in the picture below.
Assembly instructions
Bass Guitar Kit P-Style
13
Electric Bass Kit