User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cut the headstock to size
- 3.2 Painting the body and neck
- 3.3 Mounting the tuners
- 3.4 Mounting the string retainer
- 3.5 Mounting the guitar neck
- 3.6 Wiring the potentiometers, pickups and switches
- 3.7 Mounting the pickguard
- 3.8 Mounting the bridge
- 3.9 Mounting the strap buttons
- 3.10 Strings, neck relief, string height and pickups
- 4 Protecting the environment
Run the cable for earthing the strings (stripped, without connectors) through the
channel in the recess for the potentiometers and into the hole on the front.
Pull the cable out of the hole far enough to ensure sucient contact with the met‐
allic surface when the bridge is installed. Earthing the strings reduces noise (hum‐
ming).
Assembly instructions
12
Bass Guitar Kit P-Style
Electric Bass Kit