User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cut the headstock to size
- 3.2 Painting the body and neck
- 3.3 Mounting the tuners
- 3.4 Mounting the string retainer
- 3.5 Mounting the guitar neck
- 3.6 Mounting the pickguard
- 3.7 Wiring the potentiometers, pickups and switches
- 3.8 Mounting the bridge
- 3.9 Mounting the strap buttons
- 3.10 Strings, neck relief, string height and pickups
- 4 Protecting the environment
From the rear side of the headstock, insert the tuners into the holes provided. Align
the tuners so that the tuning pins are vertical to the upper edge of the headstock.
As illustrated, fasten the tuners in this position with the screws provided.
3.4 Mounting the string retainer
Screw the string retainer to the front of the headstock in the holes provided next to
the tuners.
Ensure the string retainer can still move freely. It will be secured by the tension of the
strings.
Assembly instructions
Bass Guitar Kit J-Style
9
Electric Bass Kit