User manual
Table Of Contents
- Table of contents
- 1 Safety instructions
- 2 Scope of delivery
- 3 Assembly instructions
- 3.1 Cut the headstock to size
- 3.2 Painting the body and neck
- 3.3 Mounting the tuners
- 3.4 Mounting the string retainer
- 3.5 Mounting the guitar neck
- 3.6 Mounting the pickguard
- 3.7 Wiring the potentiometers, pickups and switches
- 3.8 Mounting the bridge
- 3.9 Mounting the strap buttons
- 3.10 Strings, neck relief, string height and pickups
- 4 Protecting the environment
3.6 Mounting the pickguard
First, adjust the width of the recess for the guitar neck on the pickguard with a
needle le and/or sandpaper. Next, position the pickguard over the front of the body
so that the pickups and all the wires can be seated in the correct recesses. Screw the
pickguard onto the body using the screws provided as shown in the picture below.
3.7 Wiring the potentiometers, pickups and switches
The pickups, potentiometers and jack socket are wired using connectors. Push a
spring onto each of the screws on the pickup. Run the pickup cable through the
recess for the pickguard into the recess for the potentiometers.
Assembly instructions
Bass Guitar Kit J-Style
11
Electric Bass Kit