Owner manual

OPERATION AND INSTALLATION MANUAL
Page 5
CAUSE THE EYE END OF THE EYE BOLTS
TO SHEAR AND/OR PRODUCE AN INACCU-
RATE WEIGHT READING.
Round Vessel with
4 Load Point
Assemblies
FIG. 5: 4 LOAD POINT ASSEMBLY
NOTE: In case there is some doubt concerning load point
assembly installation, contact your local Hardy Rep-
resentative, Hardy Process Solutions, Application
Engineering or Customer Support Department for
assistance.
Replacing the Load
Sensor
NOTE: Make sure that the rod ends are threading into the
threaded holes smoothly and easily before final
assembly.