User guide

Section 6: Serial I/O
12/09 17 0596-0315-01 Rev B
Displays “L
OAd1”, then raw counts
Ap
ply test weights to scale. Press PROGRAM/ENTER key
Disp
lays correct weight. Note: UNITS LED blinking
Press the 2 key or internal S1
Di
splays microvolts per division (x.xxuPd)*
Press any front panel key to return to “CAL” prompt
Press OVER/UNDER/NEXT to display “donE”
Press
PROGRAM/ENTER to display “SAvE”
Press
PROGRAM/ENTER to display “SAvEd”
Scale returns to weigh mode
*T
he “uPd” (microvolts per division) must be one (1.0) or greater for proper operation.