Instruction Manual

PROVIDING SOLUTIONS IN:
Tension Control
Process Weighing
Vibration Monitoring
Local Field Service
9440 Carroll Park Dr. · Suite 150 · San Diego, CA 92121-5201· 858/278-2900 · 800/821-5831
Fax [phone] · Web www.hardyinst.com
Document Number: 0596-0320-01 Revision A
o Auto – Transmit occurs when autoprint threshold is met or exceeded
o diS – continuous output using remote display format
• Baud – set baud rate port 1
• Dbit – set data bits (7 or 8) Port 1
• P – Parity setting (odd/even/none) Port 1
• Busy – set handshaking (no, lo, hi) Port 1
• Opti – include time on output Port 1
• Opda – include date on output Port 1
• Opid – include ID on output Port 1
• Port 2 (set port 2 output)
o Off
o Poll
o Pollid
• Baud Port 2
• Dbit Port 2
• P Port 2
• Opte Port 2
• Opda Port 2
• Opid Port 2
• Int – set intensity of leds on front display
Config Menu
• Cap – Scale capacity
• Units – set up available units
• P-units - Primary units of measure
• Lboz – enable ability to display lb oz as units
• Cust – custom units (primary units * c-factor set in App)
• Azt – auto zero tracking (set per division/increment/graduation)
o Off
o 0.5
o 1
o 3
• Bal – Motion band (set per division/increment/graduation)
o Off
o 0.5
o 1
o 3