Manual

ADVANTAGE LITE SERIES: HI LPWR

INSTALLATION AND ASSEMBLY INSTRUCTIONS

Model Numbers

Conversion kits are available for the wire rope to rubber element mount-

ing system. An upgrade kit is available to convert these load cells to the

current rubber element design. You must upgrade all mounts on the ves-

sel. (Note: If the mount assembly is okay, load sensors are still available

using the model number on the side of the load sensor.)

Note: There is a change in height.

Assembly before update (obsolete)

Basic Engineering Principle for Positioning Load Point

Assemblies

Load Point Assemblies should be positioned such that the load (weight)

is distributed as evenly as possible between each load point assembly in

the scale.

Physical Dimensions

* Measured from the bottom of the base to the top/rear of the

load sensor, behind the load sensor bolts.

CAPACITY

Load Point

Model Number

Load Sensor

Model Number

LB KG

440 200 HI LPWR440-33C HI SB02-440

1100 500 HI LPWR1.1K-33C HI SB02-1.1K

2200 1000 HI LPWR2.2K-33C HI SB02-2.2K

4400 2000 HI LPWR4.4K-33C HI SB02-4.4K

MODEL # A B C

HI LPWR440-33C 5.06 (128.6) 4.02 (102.0) 3.27 (83.0)

HI LPWR1.1K-33C 5.06 (128.6) 4.02 (102.0) 3.27 (83.0)

HI LPWR2.2K-33C 5.06 (128.6) 4.02 (102.0) 3.27 (83.0)

HI LPWR4.4K-33C 5.15 (130.9) 4.02 (102.0) 3.27 (83.0)

MODEL # D E F

HI LPWR440-33C 4.22 (107.1) 3.23 (82.0) 2.52 (64.0)

HI LPWR1.1K-33C 4.22 (107.1) 3.23 (82.0) 2.52 (64.0)

HI LPWR2.2K-33C 4.22 (107.1) 3.23 (82.0) 2.52 (64.0)

HI LPWR4.4K-33C 4.22 (107.1) 3.23 (82.0) 2.52 (64.0)

MODEL # G H Height*

HI LPWR440-33C 2.12 (53.9) 1.44 (36.5) 2.15 (54.7)

HI LPWR1.1K-33C 2.12 (53.9) 1.44 (36.5) 2.28 (57.9)

HI LPWR2.2K-33C 2.12 (53.9) 1.44 (36.5) 2.40 (61.0)

HI LPWR4.4K-33C 2.12 (53.9) 1.44 (36.5) 3.25 (82.6)

PAGE 1
ADVANTAGE LITE SERIES: HI LPWR INSTALLATION AND ASSEMBLY INSTRUCTIONS Physical Dimensions Model Numbers CAPACITY Load Point Model Number Load Sensor Model Number LB KG 440 200 HI LPWR440-33C HI SB02-440 1100 500 HI LPWR1.1K-33C HI SB02-1.1K 2200 1000 HI LPWR2.2K-33C HI SB02-2.2K 4400 2000 HI LPWR4.4K-33C HI SB02-4.4K Conversion kits are available for the wire rope to rubber element mounting system.
PAGE 2
ISO Exploded View Electrical Termination Cable Color Codes The cable is 6 conductor, shielded (floating) and 20 feet in length. EXC+ EXC SHIELD C2+ C2SIG + SIG - Red Black Yellow Gray Violet Green White Specifications Part Numbers 1. Load Sensor - See Front Page 2. Spacer (Used on HI LPWR4.4K) - Prt. #5504-0009-01 3. Base - Prt. # 5504-0001-01 4.