Installation Sheet

ManualsBrandsHardware Resources ManualsPull Out OrganizersHardware Resources 26" Wide Base Cabinet Pull Out Organizer with Soft Close Slides

IMPORTANT:

Before you begin, make sure you familiarize

yourself with all the parts and fully read the

instructions.

CUSTOMER SERVICE:

Toll free customer help line available weekdays

between 7:00am and 6:00pm Central Time at

800-463-0660.

TOOLS NECESSARY:

Screw gun or Phillips screwdriver and tape

measure. NOTE: If screw gun has a clutch, set to

lowest setting so as not to over tighten and/or

strip screws.

PARTS IDENTIFICATION:

A Basket Organizer 1 pcs

B Bottom Panel Liner 1 pcs

C Slide Assembly 1 pcs

D Extension Arm Screws 4 pcs

E Slide Mounting Screws 8 pcs

F Extension Arm 4 pcs

Storage with Style Basket Systems

Installation Instructions for the SWS-WB Series

Scan to watch the installation video

https://delivr.com/2eyqn

SIDE MOUNT INSTALLATION

STEP 3

Measure 1-3/8” from behind face frame to the Slide

Assembly (C).

STEP 4

Use 8 - #8 x 3/8”at head screws (not included) to

ax Extension Arms (F) to the side of the cabinet.

STEP 5

Tighten Extension Arms Screws (D) at desired

location.

STEP 6

Reattach Basket Organizer (A) to Slide Assembly (C)

by pushing back until audible click.

STEP 2

Loosen the Extension Arm Screws (D).

STEP 1

Remove the bottom insert panel. Remove the

basket from the slides by pressing inward on the

slide release clip.

Extension

Arm Screws

Screws not included

Extension

Arm Screws

Summary of content (2 pages)

PAGE 1
Storage with Style Basket Systems Installation Instructions for the SWS-WB Series SIDE MOUNT INSTALLATION Scan to watch the installation video STEP 1 https://delivr.com/2eyqn STEP 3 STEP 2 Extension Arm Screws IMPORTANT: Before you begin, make sure you familiarize yourself with all the parts and fully read the instructions. CUSTOMER SERVICE: Toll free customer help line available weekdays between 7:00am and 6:00pm Central Time at 800-463-0660.
PAGE 2
BOTTOM MOUNT INSTALLATION STEP 1 STEP 2 STEP 3 STEP 4 Slide Screws Extension Arm Screws Slide Screws Remove the bottom insert panel. Remove the basket from the slides by pressing inward on the slide release clip. STEP 5 Remove the Extension Arm Screws (D) and loosen the Slide Mounting Screws (E) from slides. STEP 6 Remove 4 - Extension Arms (F) from Slide Assembly (C). Tighten Slide Screws back up. STEP 7 Attach to bottom Measure 1-3/8” from behind face frame to the Slide Assembly (C).