Installation Sheet

IMPORTANT:
Before you begin, make sure you familiarize
yourself with all the parts and fully read the
instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays
between 7:00am and 6:00pm Central Time at
800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver and tape
measure. NOTE: If screw gun has a clutch, set to
lowest setting so as not to over tighten and/or
strip screws.
PARTS IDENTIFICATION:
A Pilaster Pole 4 pcs
B Pilaster Extension Connect Clip 4 pcs
C
Shoulder Screw, M4 x 6 mm long,
3 mm Shoulder
16 pcs
D
Phillips at Head Wood Screw,
#8 x 1”
16 pcs
E Nylon Push Rivet 16 pcs
Storage with Style Pilaster System
Installation Instructions for the SWS-PIL Series
STEP 3
Press Inward
Bottom View
Detach basket from slide assembly by pressing the clip release
STEP 2
Measure 15” between front and
back poles and attach back pilaster
poles (A) using #8 x 1” wood screws
(4x each)
STEP 1
Place front pilaster poles (A) approximately 1 ¾” behind face
frame using #8 x 1” wood screws (4x each)