Manualshelf

Installation Sheet

ManualsBrandsHardware Resources ManualsPull Out OrganizersHardware Resources 15" Bottom Mount Double Bin Pull Out Trash Can with Full Extension and Soft Close Slides for 50 Quart Bins - Included
12
STEP 3
Organizer Installation
STEP 4
Door Installation
Slide the organizer back onto the slide base until the release clips
are fully seated in the slide catch.
Using a tape measure, determine the mounting location of the top door mounting brackets. Install door with two (2) #8 X 5/8” Flat Head
Phillips Wood Screws and make necessary adjustments following the diagram above. To adjust door up or down loosen door mounting
screws (A). To adjust left or right, loosen both set screws (B) adjust and retighten. To adjust tilt, loosen tilt screw (C), adjust and retighten
set screws. Once the door is in the desired position rmly secure the two bottom door mounting screws.
SWSMBM12/17 v.2
B
A
Tilt adjustment
Left/Right adjustment
Up/Down adjustment
C
STEP 5
Finishing Touches
Remove the packaging material from around the bottom panel
and place it in the bottom of the organizer unit. Install trash
cans and cycle the organizer making sure the soft-close slides
are operating.