Installation Sheet

IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays between 7:00am
and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver, level and tape measure. NOTE:
If screw gun has a clutch, set to lowest setting so as not to over
tighten and/or strip screws.
PARTS IDENTIFICATION:
A Base Assembly 1 pc
B Basket Assembly 1 pc
C Primary Basket 2 pcs
D Secondary Basket 2 pcs
E Primary Liner 2 pcs
F Secondary Liner 2 pcs
G Roller Guide Bracket 1 pc
H Installation Hinge Spacer 1 pc
J M6 x 8 mm Pan Head Machine Screw 8 pcs
K #8 Pan Head Wood Screw 8 pcs
STEP 1 - Install Guide and Spacer STEP 3 - Reconguration Vertical
Support Structural
Loosen the preinstalled screws on the Base Assembly. Align
the slots on the Roller Guide Bracket and Hinge Spacer with the
screws and slide into place. Tighten screws.
First extend the Basket Carrier Assembly to gain access and
loosen the screws in View Z by 2-3 turns, and slide to Right Hand
conguration.
STEP 2 - Install Base Assembly STEP 4 - Secure Basket Assembly-Left
Position the Roller Guide Bracket and Installation Hinge Spacer
against the back of the face frame or 3/4” behind opening on
frameless application. Install completed Base Assembly to the
cabinet oor with (6) #8 Pan Head Wood screw. Remove all tie
wraps securing the assembly.
With the right Basket Carrier Assemblies extended outside of the
cabinet, tighten with the M6 pan head machine screws. Then,
slide the Vertical Support Assembly to the right side and extend
the left Basket Carrier out of the cabinet. Tighten with M6 pan
head machine screws.
A
H
G
E
C
J
B
D
F
Scan to watch the installation video
https://delivr.com/23y5t
Installation Instructions for
the SWS-BC Series
slots
Isometric View
K
(Ships left-handed, Instructions for Field
Reconguration for Right-handed)
Storage with Style
Blind Corner Organizer
Right-handed
preinstalled screws
pre-assembled for left
hand installation
eld reconguration for
right hand installation
(4) M6 pan head
machine screws
(4) M6 pan head
machine screws
Isometric View
Flush with face frame
(6) #8 Pan Head
Wood Screw
Step A: Extend both
Basket Carrier Assembly
Step B: Loosen these
screws by 2-3 turns to
move the slide forward/
backward within the
slot for Right/Left
conguration
See Detail Z
Detail Z
Scale 0.500