Installation Sheet

IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays between 7:00am
and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver, level and tape measure. NOTE:
If screw gun has a clutch, set to lowest setting so as not to over
tighten and/or strip screws.
PARTS IDENTIFICATION:
A Base Assembly 1 pc
B Basket Assembly 1 pc
C Primary Basket 2 pcs
D Secondary Basket 2 pcs
E Primary Liner 2 pcs
F Secondary Liner 2 pcs
G Roller Guide Bracket 1 pc
H Installation Hinge Spacer 1 pc
J M6 x 8 mm Pan Head Machine Screw 8 pcs
K #8 Pan Head Wood Screw 8 pcs
STEP 1 - Install Guide and Spacer STEP 3 - Secure Basket Assembly-Left
Loosen the preinstalled screws on the Base Assembly. Align
the slots on the Roller Guide Bracket and Hinge Spacer with the
screws and slide into place. Tighten screws.
Align the Basket Assembly on to the base assembly as shown.
Remove all tie wraps that secure the assembly. Extend the left
side of the basket assembly to the outside of the cabinet. Firmly
secure using (4) M6 pan head machine screws.
STEP 2 - Install Base Assembly STEP 4 - Secure Basket Assembly-Right
Position the Roller Guide Bracket and Installation Hinge Spacer
against the back of the face frame or 3/4” behind opening on
frameless application. Install completed Base Assembly to the
cabinet oor with (6) #8 Pan Head Wood screw. Remove all tie
wraps securing the assembly.
With the left side of the basket assembly is still extended, slide
the complete assembly to the left side of the cabinet. Extend
the right side of the basket assembly to the outside of the
cabinet. Install the remaining (4) M6 pan head machine screws
as shown.
Isometric View
(Ships left-handed)
A
H
G
E
C
J
B
D
F
Scan to watch the installation video
https://delivr.com/23y5t
Storage with Style
Blind Corner Organizer
Left-handed
Installation Instructions for
the SWS-BC Series
(4) M6 pan head
machine screws
(4) M6 pan head
machine screws
(4) M6 pan head
machine screws
preinstalled screws
slots
Isometric View
Isometric View
Flush with face frame
(6) #8 Pan Head
Wood Screw
K