Installation Sheet

STEP 3
Install cabinet member of the slide into the mounting bracket.
Angle the top in rst and then snap into place.
PPR07/17 v.1
STEP 4
Install Cross Member to Slide Cover by sliding the angle brace
inside the Cross Member making sure the slotted pant hanger
holders are pointing upward. Loosely fasten with 2 – Pan
Head Machine screws provided.
STEP 5
Install the Pant Rack organizer back onto the slide. Cycle the
unit a couple of times to be sure it is not binding, allowing the
Cross Member to center between the Slide Covers. Securely
tighten the machine screws.
STEP 6
Install the pant rack hangers.