Installation Sheet

STEP 1

Determine mounting location and install the mounting bracket with the arrows pointing up with the 5 mm Euro screws provided.

STEP 2

Separate slide by compressing the black release clip.

IMPORTANT:

Before you begin, make sure you familiarize yourself with all the

parts and fully read the instructions.

CUSTOMER SERVICE:

Toll free customer help line available weekdays between 7:00am

and 6:00pm Central Time at 800-463-0660.

TOOLS NECESSARY:

Screw gun or Phillips screwdriver. NOTE: If screw gun has a

clutch, set to lowest setting so as not to over tighten and/or

strip screws.

PARTS IDENTIFICATION:

1 Mounting Bracket qty 2

2 Pant Rack Slide Covers qty 2

3 Pant Rack Cross Member qty 1

Pant Hanger

PPR-1814 qty 9

PPR-2414 qty 13

PPR-3014 qty 16

5 5 mm Euro Screw qty 4

6 Color coated Pan Head Machine Screw qty 4

PANT RACK SERIES

Installation Instructions

for the PPR-1814, PPR-2414, PPR-3014

PAGE 1
PANT RACK SERIES Installation Instructions for the PPR-1814, PPR-2414, PPR-3014 IMPORTANT: STEP 1 Before you begin, make sure you familiarize yourself with all the parts and fully read the instructions. CUSTOMER SERVICE: Toll free customer help line available weekdays between 7:00am and 6:00pm Central Time at 800-463-0660. TOOLS NECESSARY: Screw gun or Phillips screwdriver. NOTE: If screw gun has a clutch, set to lowest setting so as not to over tighten and/or strip screws.
PAGE 2
STEP 3 STEP 4 Install cabinet member of the slide into the mounting bracket. Angle the top in first and then snap into place. Install Cross Member to Slide Cover by sliding the angle brace inside the Cross Member making sure the slotted pant hanger holders are pointing upward. Loosely fasten with 2 – Pan Head Machine screws provided. STEP 5 Install the Pant Rack organizer back onto the slide.