Installation Sheet

To Install on Adjustable Shelf:

Use shelf brackets to x shelf position

MPLO215-R

Pullout Lid Organizer

Shelf

Bracket

(x4)

Included: Tools Needed:Minimum Opening:

Phillips

Screw Driver

Tape

Measure

(optional)

1. Make sure the cabinet hinge will not

interfere with organizer when installed

4. Align front of slide with inside lip of cabinet

5. Screw slide frame into cabinet with 4

included screws

2. Release slide by pushing the black trigger

UP on the LEFT side and DOWN on the

RIGHT side

6. Align and reinsert organizer into slide

frame

3. Remove organizer from slide frame by

pulling forward

7. Push organizer into slide frame until it

CLICKS into place

Installation Instructions

11-1/2" minimum

Opening

½” Screw (x8)

⁄” Screw (x4)

PAGE 1
MPLO215-R Pullout Lid Organizer Installation Instructions Minimum Opening: Included: 5/8” Screw (x4) 11-1/2" minimum Opening 1. Make sure the cabinet hinge will not interfere with organizer when installed 4. Align front of slide with inside lip of cabinet 5. Screw slide frame into cabinet with 4 included screws Tools Needed: To Install on Adjustable Shelf: Use shelf brackets to fix shelf position Phillips Screw Driver Tape Measure (optional) Shelf Bracket (x4) ½” Screw (x8) 2.
PAGE 2
MPLO215-R Organizador de retiro para Tapas Organisateur coulissant pour couvercles ESP: Abertura mínima FR: Ouverture minimale ESP: Instrucciones de instalacion FR: Instructions d’installation ESP: Incluido FR: Inclus 5/8” tornillo (x4) Vis de 5/8 po (x4) 11-1/2" minimum Opening ESP: Herramientas necesarias FR: Outils nécessaires ESP: destornillador phillips FR: Tournevis cruciforme (Phillips) ESP: Para instalar el estante ajustable: Utilice soportes de estante para fijar la posición del estante FR: P