Installation & Assembly

Blind Corner Swingout
Installation Instructions
for the BCSO Series
STEP 6 STEP 7 STEP 8
Firmly secure the bottom plate on the complete Tower Arm
Frame Assembly in position 1 using (11) #6 x 3/4” at head Philips
wood screws.
Firmly secure the bottom plate on the complete Axial Arm Frame
Assembly in position 2 using (9) #6 x 3/4” at head Philips wood
screws.
Lift the Telescopic Frame Extensions until they are rmly against
the bottom of the counter top or cabinet supports and tighten
the (2) #10 x 5/8” washer head machine screws in the middle of
both frames. Level each frame and mark mounting locations.
Then rmly secure using (4) #6 x 5/8” at head wood screws in
the top of each mounting frame bracket.
STEP 9
Left Swing
Right Swing
Position the lower Tower and Axial Swing Arms outside the cabinet and install one (F) Swingout Tray into the pivots in each arm.
Repeat for top tray. Test motion of both trays.
BCSO12/14 v.1
SIZES A
A B C D E
F.O. FRAMED F.O. FRAMELESS
MIN MAX MIN MAX MIN MAX
15” 15” 17” 15-3/4” 17-3/4” 18-1/2” 33-1/2” 20” 29-1/2” 21”
381 432 400 451 470 851 508 750 533
18” 18” 20” 18-3/4” 20-3/4” 21-1/2” 34-1/4” 20” 29-1/2” 21”
457 508 476 781 546 870 508 750 533
21” 21” 23” 21-3/4” 23-3/4” 24-1/2” 39-1/4” 20” 29-1/2” 21”
533 584 552 578 622 997 508 750 533