Installation & Assembly

ManualsBrandsHardware Resources ManualsAll Cabinet OrganizationKidney Lazy Susan

Premium Wood Kidney Lazy Susans

Installation Instructions for the LSK2xx Series

IMPORTANT:

Before you begin, make sure you familiarize yourself with all

the parts and fully read the instructions.

CUSTOMER SERVICE:

Toll-free customer help line available weekdays between

7:00am and 6:00pm Central Time at 800-463-0660.

TOOLS NECESSARY:

Screw gun or Phillips screwdriver and tape measure. NOTE: If

screw gun has a clutch, set to lowest setting so as not to over

tighten and/or strip screws.

STEP 1

Measure and Mount Supports

Top Mounting Support

Shelf Support

Plastic Shelf

Pole Assembly

1-9/32”

Locking Set Screw

Center Detent Marks

1-1/16”

Shelf Hub

Shelf Support used as

Lower Mounting Support

Shelf Hub

Top Mounting Support

Shelf Support

Plastic Shelf

Pole Assembly

1-9/32”

Locking Set Screw

Center Detent Marks

1-1/16”

Shelf Hub

Shelf Support used as

Lower Mounting Support

Shelf Hub

Mark layout for lower mounting support by placing a shelf in the cabinet. Center the shelf on the bottom of the cabinet making sure

you have proper clearance from cabinet walls and door. Mark the mounting location by tracing around the hole in the middle of the

shelf. Measure the center of the bottom mounting location and transfer to the top of the cabinet. Align Top Mounting Support with

center detent marks and install with four (4) - #8 x 5/8” Pan Head Phillips Wood Screws. Place one (1) Shelf Support on the lower marks

and secure with four (4) - #8 x 3/4” Flat Head Phillips Wood Screws to the bottom of the cabinet as shown (align set screw as shown for

proper shelf orientation).

#8 x 3/4” Flat Head Phillips Wood Screw 4X

#8 x 5/8” Pan Head Phillips Wood Screw 4X

#8 x 1/2” Flat Head Machine Screw 6X

Telescoping Twist & Lock Pole Assembly 1X

Kidney Shelf 2X

Shelf Support 2X

Shelf Hub 2X

Shelf Hub Cone 2X

Top Mounting Support 1X

Top Mounting Support

Shelf Hub

Solid Wood Shelf

Shelf Support used as

Bottom Mounting Support

Telescoping Twist & Lock

Pole Assembly

1-9/32”

Locking Set Screw

Center Detent Marks

1-1/16”

Shelf Hub Cone

Shelf Support

Shelf Hub

Summary of content (2 pages)

PAGE 1
Premium Wood Kidney Lazy Susans Installation Instructions for the LSK2xx Series IMPORTANT: Before you begin, make sure you familiarize yourself with all the parts and fully read the instructions. 1-9/32” 1-1/16” STEP 1 Measure and Mount Supports CUSTOMER SERVICE: Toll-free customer help line available weekdays between 7:00am and 6:00pm Central Time at 800-463-0660. Center Detent Marks TOOLS NECESSARY: Locking Set Screw Screw gun or Phillips screwdriver and tape measure.
PAGE 2
STEP 2 - Install Hubs STEP 3 - Shelf Assembly Rib Groove Insert one Shelf Hub through the bottom of a shelf as shown, making sure the groove in the hub is opposite of the kidney cut out in the shelf. Place one Shelf Hub Cone on the top of the shelf and fasten using (3) #8 x 1/2” Flat Head Machine Screws provided. NOTE: Make sure the rib inside the Shelf Hub Cone is aligned with the groove in the hub (see picture). Repeat with second shelf.