Installation Sheet

Minimum Opening:
DMS6-PC-R
Door Mounted Tray System
Installation Instructions
Included: Tools Needed:
Phillips Screw Driver
Tape Measure
(optional)
¾” Screw (x8)
Basket (x2)
Vertical
Support (x2)
10 ¾” [272.5mm]
1. Cut out the below mounting
template and use it to mark the
2 holes for the top of the vertical
supports.
2. Screw in top of vertical supports
into the door using marked
holes. Do not screw in bottom of
supports.
3. Place baskets into vertical supports
at desired positions. Baskets can
be repositioned later.
4. Screw in bottom of vertical
supports while baskets are
attached. For more support, use
additional screws as needed.