Installation Sheet

BFPO212/18 v.1
STEP 7
To adjust door up or down loosen door mounting
screws (A). To adjust left or right, loosen both
set screws (B) adjust and retighten. To adjust
tilt, loosen both set screws (B) and then turn tilt
screw (C) clockwise to desired distance and then
retighten set screws.
B
A
C
Tilt adjustment (up to + 1/4”)
Left/Right adjustment (+/- 7/8”)
Full extension (+2-1/2”)
Up/Down adjustment (+/- 1/4”)
Face frame
Door frame
Center of
mounting
bracket slot
to estimated
top of door
Door mounting
set screws
STEP 6
Loosen the door mounting set screws and slide bracket out to desired
position to attach to the door rail. Measure from the center of the slot
on the door mounting bracket to the estimated top of door. Mark
door with measurement for both top brackets. Install door with the
four (4) #8 x 5/8 Flat Head Phillips Wood Screws provided. (NOTE:
DETERMINE CORRECT SCREW LENGTH TO DOOR PANEL THICKNESS)
STEP 5
Loosen door mounting bracket screws.