Installation Sheet

STEP 5 STEP 6 STEP 7
Firmly secure the Center Support on the open side of cabinet
using (10) #6 x 3/4” at head Philips wood screws.
Firmly secure the Corner Support on the hinge side using (10) #6
x 3/4” at head Philips wood screws.
Lift the Telescopic Support Extensions until they are rmly
against the bottom of the counter top or cabinet supports and
tighten the (2) #10 x 5/8” washer head machine screws in the
middle of the arms. Level arms and mark mounting locations.
Then rmly secure using (4) #6 x 5/8” pan head wood screws in
each top mounting frame bracket.
STEP 8
Left Swing
Right Swing
Position the lower swing arms outside the cabinet and install bottom tray into the pivots in each arm as shown above. Repeat for top
tray and test motion of trays.
BCSO204/17 v.1
Tighten (2) #10 x 5/8” screws
Blind Corner Swingout
Installation Instructions for the BCSO2 Series
Mount using (4) #6 x 5/8”
pan head screws