Installation Sheet

Compact Hinges
1. Open and place the hinge into the
boring pattern 35mm hole (gure 1) - two
locations per door
2. Install (2) #6 x 1/2” at head screws into
the 8mm doweled holes
3. Repeat (step 2) for second hinge
4. Hold cabinet door perpendiular to
cabinet frame and index both hinges on
leading face frame edge
5. Install (1) #8 5/8” pan head screw through
each hinge into the face frame
6. Close cabinet door to cabinet face
7. Check what adjustments need to be
made
8. Follow (gure 2) for 6-way adjustments
Hinge Installation
Horizontal
adjustment
Vertical
adjustment
Depth
adjustment
Rotate front screw to
increase or decrease door
overlay (-2mm).
Rotate cam screw on
mounting plate to adjust
door position (-2 mm). On
non-cam mounting plates,
loosen screws, adjust door
and retighten screws.
Rotate rear cam screw
to adjust door position
(+3mm, -2mm).
Face frame
67
11.2
67
11.2
38.5
9.5
45
Tab
35 45
Dept h 1 1 . 2
8
Horizontal
adjustment
Vertical
adjustment
Depth
adjustment
Rotate front screw to
increase or decrease door
overlay.
Rotate center cam screw to
adjust door position.
Rotate rear cam screw to
adjust door position.
Long Arm Hinges
1. Open and place the hinge into the
boring pattern 35mm hole (gure 1) - two
locations per door
2. Install (2) #6 x 1/2” at head screws into
the 8mm doweled holes
3. Repeat (step 2) for second hinge
4. Hold cabinet door perpendicular to
cabinet frame and index both hinge
plates on leading face frame edge
5. Install (2) #6 x 5/8” at head screws
through each hinge plate into the face
frame
6. Close cabinet door to cabinet face
7. Check what adjustments need to be
made
8. Follow (gure 4) for 6-way adjustments
(Figure 1)
(Figure 2)
(Figure 4)
(Figure 3)