Installation Sheet

STEP 1
Determine mounting location and install the mounting bracket with the arrows pointing up with the 5 mm Euro screws provided.
BELT RACK
Installation Instructions
for the 355B
IMPORTANT:
Before you begin, make sure you familiarize yourself with all the
parts and fully read the instructions.
CUSTOMER SERVICE:
Toll free customer help line available weekdays between 7:00am
and 6:00pm Central Time at 800-463-0660.
TOOLS NECESSARY:
Screw gun or Phillips screwdriver. NOTE: If screw gun has a
clutch, set to lowest setting so as not to over tighten and/or
strip screws.
PARTS IDENTIFICATION:
1 Mounting Bracket qty 1
2 Belt Rack Organizer qty 1
3 5 mm Euro Screw qty 2
1
2
3
STEP 2
Separate slide by compressing the black release clip.
STEP 3
Install cabinet member of the slide into the mounting bracket.
Angle the top in rst and then snap into place.
STEP 4
Install the Belt Rack organizer back onto the slide. Operate the
push-to-open slide by pressing on the front of the belt rack
toward the back of the closet.
355B07/17 v.1