Installation Sheet

ManualsBrandsHardware Resources ManualsCabinet Hardware209FU - PAIR of 26" 225 lb Extra Heavy Duty Full Extension Side Mount Ball Bearing Slides with 1" Overtravel

Bossier City, LA | www.HardwareResources.com

Install slide to drawer

4. Mount the drawer members to the drawer box sides ush with

the front edge and between 1/4" and 1/2" from bottom edge

depending on drawer height.

! Ensure the drawer members are parallel and level for optimal

performance.

Install drawer in cabinet

5. Before installing the drawer to the cabinet, ensure that the ball

bearing cage is located to the front of the cabinet member as

shown below. Failure to do so may damage the cabinet member.

6. Carefully insert the drawer members into the cabinet members

and slide the drawer all the way back so that the drawer members

are fully engaged.

7. Cycle the drawer all the way in and back out 4 or 5 times so that

the rear brackets are adjusted.

FRONT

BACK

Flush to ¼” from bottom; ½” when using the Face Frame Bracket

Hole pattern drawings

DRAWER MEMBER

CABINET MEMBER

DRAWER MEMBER

all measurements shown in millimeters

Specifications L A B

209FU16 - 16” 404 96 128

209FU18 - 18” 455 96 224

209FU20 - 20” 506 96 224

209FU22 - 22” 557 96 288

209FU24 - 24” 608 160 292

209FU26 - 26” 659 160 292

209FU28 - 28” 710 160 356

209FU30 - 30” 761 160 356

CABINET MEMBER

all measurements shown in millimeters

Specifications L A B

209FU16 - 16” 406 – –

209FU18 - 18” 457 128 –

209FU20 - 20” 508 128 –

209FU22 - 22” 559 128 96

209FU24 - 24” 610 160 128

209FU26 - 26” 661 160 128

209FU28 - 28” 712 160 160

209FU30 - 30” 763 160 160

2835 B

4 –

Ø5.3

46.5 60.5 A 43.7 3225.4 25.4

Ø6.4

05-2022