Installation Sheet

Wardrobe Lift
Instruction Sheet
STEP 1
Attach LH & RH Mounting Box to the Cabinet Sides using
#8X20mm Flat Head Screws. Attach Bumper Brackets
(LH & RH) to both sides by using the longer #8X26mm Flat
Head Screws.
STEP 2
Adjust the length of Pole to the appropriate position then
twist it to lock it.
STEP 3
Attach the T-Bracket and Handle to Pole using #3X10mm
Pan Head Screws.
STEP 4
Loosely attach the Side Bracket to Rail Adjustable with
M8X35mm bolts by Using Hex Key.
DO NOT TIGHTEN M8 BOLTS UNTIL STEP 5
STEP 5
Adjust the Wardrobe Rail length and twist it to lock it. After
adjusted to desired width, tighten M8 Bolts from STEP 4.
3
3
5
5
4
2
LOOSEN TIGHTEN
INSIDE THE BOX:
LH & RH Mounting Boxes
Rail-Adjustable on both sides
Adjustable Pole
Bumper Brackets(LH+RH)-1set
T-Bracket-1pc
Side Bracket-2pcs
Handle-1pc
Flat Head Screw #8X26mm-6pcs
Flat Head Screw #8X20mm-18pcs
Pan Head Screw #3X10mm-2pcs
M8X35mm-2pcs
Hex Key-1pc