Instructions / Assembly

SPECIFICATIONS
Height: 9.5” (24cm)
Installation width: 6.3” (16cm)
Upper installation width (gap between pipes); 4.3“ (11cm)
Minimum distance from the wall during installation: 3.15” (8cm)
Working pressures: Standard distribution network pressures
in the target country
Flow: Up to 1,250 gal per hour (up to 5m3 per hour)
Entry/Exit screw threads: ¾” and/or 1” BSPT
Hardless cartridge replacement: twice a year
Absolute filtering level: 1-50 micron
Hardless NG Whole House Water Filter
IMPORTANT NOTES
The installation of your Hardless Water Filter must comply
with federal, provincial, state, municipal and local laws
and regulations.
The warranty is only in effect if the Hardless is installed by
a licensed plumber or a GRY Authorized Agent.
Please only use our cartridges as we cannot guarantee the water
quality with other cartridges, and using a different manufacturer’s
cartridge will invalidate the warranty.
The valve at the bottom needs to be opened once a month
(for one minute) to wash and clean the system.
Do not use water that is microbiologically unsafe or of unknown
quality without adequate disinfection before or after the system.