CCWI 181 Spec Sheet

TECHNICAL DATA
Color White & Gray
Consistency Heavy textured
Base Synthetic latex
Solvent Water
Weight per Gallon 11.6 lbs.
Solids Content 73.4%
Viscosity Thixotropic
Coverage (UL 181 A-M) Apply 18 mil, scrim, addt. 18 mil
Coverage (UL 181 B-M)
Approximately 214 to 320 lin. ft.
per gal. at 20 to 30 mil wet fi lm
thickness at 3" width
Shore A Hardness > 20
Flexibility Passes ¼ inch mandrel bend
Time to Test 48 hours*
Service Temperature -20°F to 200°F
Mildew Resistance Mold & Mildew resistant
VOC
Exempt: 0 g/l
Non Exempt: 38 g/l (less water)
Surface Burning
Flame Spread - 0,
Smoke Developed - 0
(When tested in accordance with
ASTM E84, UL 723)
Pressure Classes
SMACNA ½ , 1, 2, 3, 4, 6 and 10
inches w.g.
Seal Class Meets Seal Class A
Packaging 11 oz. cart.; 1, 2 & 5 gal. pails
Freeze/Thaw Stability Passed 5 Cycles
*May vary according to temperature and humidity
CCWI-181
Indoor/Outdoor
Water Based Duct Sealant
A versatile, all purpose duct sealant for use on all types of metal
duct, fi berglass duct board, duct fabric and fl ex duct. CCWI- 181
incorporates a built-in polyester reinforcement for exceptional
strength, with UV inhibitors for outdoor use. UL 181A-M listed /
UL 181B-M listed.
APPLICATION
Temperature 35°F to 110°F (1.7°C to 44°C)
Method
Brush, putty knife, caulk gun
Preparation
Surface must be dry, dirt, oil, and
grease free.
Rate (UL 181 A-M)
Apply 18 mil, scrim and 18 mil
over scrim.
Rate (UL 181 B-M)
Approx. 214 to 320 lin. ft. per gal. at 20
to 30 mil wet fi lm thickness
at 3" width.
Clean Up Wet Soap and water
Clean Up Dry
UN-TACK™ or Solvent
(Use safe handling practices.)
Painting Only latex or epoxy paints
Ductboard Scrim required for UL 181A-M
STORAGE
Temperature
35°F to 110°F (1.7°C to 44°C)
DO NOT FREEZE
Shelf Life One year (unopened)
Flammability Non-fl ammable
PART NUMBERS
304142 1 Case w/ (25) 11 oz. Cartridges (White)
304146 1 Case w/ (25) 11 oz. Cartridges (Gray)
304144 1 Case w/ (4) 1-Gallon Pails (White)
304148 1 Case w/ (4) 1-Gallon Pails (Gray)
304143 1 - 2-Gallon Pail (White)
304147 1 - 2-Gallon Pail (Gray)
304145 1 - 5-Gallon Pail (White)
P/N 605681 - CCWI-181 TDS 01/ 08/13
PRECAUTIONS
Surface must be clean and free of moisture, contamination and
foreign matter. Do not allow this product to freeze. Apply when
temperatures will not fall below freezing for at least 36 – 48 hours,
depending on temperature and humidity. Do not apply this product
where temperatures will exceed 200°F. Keep out of the reach of
children. Review MSDS for complete safety information prior to use.
DO NOT use where acidic or alkaline chemicals are present (ie.,
lab fume hood, vents, etc.)
For Industrial Professional Use Only.
Underwriters Laboratories Inc. ®
LISTED
17NF
UL 181A-M
FOR USE WITH U.L. LISTED RIGID
FIBERGLASS AIR DUCTS OR CONNECTORS.
UL 181B-M
FOR USE WITH U.L. LISTED FLEXIBLE
AIR DUCTS OR CONNECTORS
SPECIFICATION/STANDARDS COMPLIANCE
Property
Method Results
Freeze Thaw &
Heat Cycling
ASTM C-731 Pass
Slump Test ASTM D-2202 Pass
VOC Limitation SCAQMD Rule 1168 Pass
USDA Pass
FDA Pass
EPA Pass
City of Los Angeles
Approval RR#8427
Pass
USA: 900 Hensley Lane, Wylie, TX 75098 • [phone]
Canada: 2100 Remembrance Road, Lachine, QC H8S 1X3 • [phone]
www.carlislehvac.com