Instructions / Assembly

Page 4Rev. 111319
DiscountRamps.com • 1-888-651-3431
Step 5. Connect the two assemblies. Fit the bolts of the foot tube assembly into the holes of the
bottom straight tubes on the axle assembly. Secure in place with lock washers (Q) and nuts (R).
Step 6. Connect the handle tube (A) to the handle straight tubes on the assembly. First, t the M6x85
bolts (M) through the upper holes and secure with lock washers (Q) and nuts (R). Then t the turn
knobs (J) into the lower holes to x the handle in the upright position.
Step 7. Connect the support tube (B) to the assembly using M6x60 bolts (O), lock washers (Q), and
nuts (R). Make sure the gas tank strap is above the support tube.
(5a) (5b)
(6a)
(7a)
(7b)
(6c)
(6b) (6d)