Product manual

Page 7For technical questions, please call 1-800-444-3353.Item 69805
Maintenance and Servicing
TO PREVENT SERIOUS INJURY:
Disconnect the power tool(s) mounted on the Tool Stand from their
electrical or compressed air power sources before performing any
inspection, maintenance, or cleaning on the Tool Stand.
Do not use damaged equipment. If abnormal noise or vibration occurs,
turn off the tool that is mounted on the Tool Stand immediately
and have the problem corrected before further use.
Inspection, Maintenance, and Cleaning
1. BEFORE EACH USE, inspect
the general condition of the
Tool Stand. Check for:
• loose hardware
• misalignment or binding of parts
• loose or improper mounting of a tool
• cracked or broken parts
• any other condition that may
affect its safe operation.
2. To clean, wipe off stand with
slightly moist cloth.