Product manual

Page 5For technical questions, please call 1-800-444-3353.Item 69805
7. Position a Bottom Short Brace
(5) with each of its ends aligned
with the Bottom Long Braces.
8. Insert two Carriage Bolts through the
aligned mounting holes of the two
Legs and Bottom Short Brace. Attach
Spring Washers and Nuts to the
Carriage Bolts and loosely tighten.
Bottom Long
Brace (2)
Leg (4)
Bottom Short
Brace (5)
Nut (8)
Spring
Washer
(9)
Carriage
Bolt (7)
Leg (4)
Figure 3
9. Repeat Steps #7 and #8 above to
attach the remaining Bottom Short
Brace to the remaining two Legs.
10. Align the mounting holes located at each
end of a Top Long Brace (1) with the
mounting holes located on the upper,
inside edges of two Legs. Position it
above one of the Bottom Long Braces.
11. Insert four Carriage Bolts (7) through
the aligned mounting holes of the Top
Long Brace (1) and two Legs (4). Attach
Spring Washers (9) and Nuts (8) to the
Carriage Bolts and loosely tighten.
Bottom Long
Brace (2)
Top Long
Brace (1)
Leg (4)
Nut (8)
Figure 4
Carriage
Bolt (7)
Spring
Washer
(9)
Leg (4)
12. Repeat Steps #10 and #11 above
to attach the remaining Top Long
Brace to the two remaining Legs.