Important Safety Information 1. Assemble only according to these instructions. Improper assembly can create hazards. 9. Place stand on flat, level, sturdy surface capable of supporting stand, tool, and all workpieces. 2. Wear ANSI-approved safety goggles and heavy-duty work gloves during assembly. 10. Before use, secure the tool to the Tool Stand using appropriate hardware (not included). If tool does not bolt securely to stand, do not use it with this stand. 3.
Specifications Item 69805 Dimensions 18-3/8" x 20-1/2" (Top) Up to 25.2" x 27.16" (Base – Leg Spread) Maximum Weight Capacity 500 Lb. Height Adjustment 3" Increments (26 –29 –32 inches) Mounting Holes 8 Holes @ 0.310" Diameter Leg Anchor Holes 4 Holes @ 0.310" Diameter For technical questions, please call 1-800-444-3353.
Assembly Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. Assembling Tool Stand 1. Position the four Extension Feet (6) on the bottom, outside edges of the four Legs (4). 2.
7. Position a Bottom Short Brace (5) with each of its ends aligned with the Bottom Long Braces. 8. Insert two Carriage Bolts through the aligned mounting holes of the two Legs and Bottom Short Brace. Attach Spring Washers and Nuts to the Carriage Bolts and loosely tighten. Leg (4) Nut (8) Spring Washer (9) Carriage Bolt (7) 10. Align the mounting holes located at each end of a Top Long Brace (1) with the mounting holes located on the upper, inside edges of two Legs.
13. Position a Top Short Brace (3) with each of its ends aligned with the Top Long Braces. 14. Insert four Carriage Bolts through the aligned mounting holes of the two Legs and Top Short Brace. Attach Spring Washers and Nuts to the Carriage Bolts and loosely tighten. Top Short Brace (3) Nut (8) Top Long Brace (1) Spring Washer (9) 16. Place the Tool Stand at the location where it will used. With the aid of a corner square and a level, make sure the top of the Tool Stand is level.
Maintenance and Servicing TO PREVENT SERIOUS INJURY: Disconnect the power tool(s) mounted on the Tool Stand from their electrical or compressed air power sources before performing any inspection, maintenance, or cleaning on the Tool Stand. Do not use damaged equipment. If abnormal noise or vibration occurs, turn off the tool that is mounted on the Tool Stand immediately and have the problem corrected before further use. Inspection, Maintenance, and Cleaning 1.
Record Serial Number Here: Note: If product has no serial number, record month and year of purchase instead. Note: Some parts are listed and shown for illustration purposes only, and are not available individually as replacement parts. Page 8 For technical questions, please call 1-800-444-3353.
PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Parts List Part 1 2 3 4 5 6 7 8 9 Page 10 Description Top Long Brace 19.69" (500mm) Bottom Long Brace 23.74" (603mm) Top Short Brace 17.71" (450mm) Leg 26.38" (670mm) Bottom Short Brace 21.77" (553mm) Extension Foot 9.76" (248mm) Carriage Bolt M6 Nut M6 Spring Washer Ø6 Qty. 2 2 2 4 2 4 40 40 40 For technical questions, please call 1-800-444-3353.
Assembly Diagram 8 9 7 3 1 4 5 2 6 Item 69805 For technical questions, please call 1-800-444-3353.
Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
