Product manual

Page 6 For technical questions, please call 1-800-444-3353. Item 60800
SAFETY OPERATION MAINTENANCESETUP
Operating Instructions
Read ENTIRE IMPORTANT SAFETY INFORMATION section at beginning of this manual including
all text under subheadings therein before set up or use of this product.
Loading
Note: Check local automotive regulations before
driving with Cargo Unloader attached.
1. Before each use, clean truck bed and Load
Sheet. Dirt and debris can damage Load
Sheet. Spray silicone lubricant (not included)
around “L” Brackets and Crank Slot.
2. Make sure tailgate is closed and latched.
3. Do not exceed rated weight
capacity of Cargo Unloader.
4. Do not exceed rated weight capacity of truck.
Refer to truck’s Gross Vehicle Weight Rating.
5. Remove hook-and-loop straps securing Load Sheet.
6. Make sure Load Sheet is centered across bed.
7. Pull Load Sheet out to cover bed.
Note: Do not pull Load Sheet out beyond “Stop” labels.
Leave at least three wraps on Roller Bar at all times.
8. Load truck, making sure load is centered on
Load Sheet and does not accumulate around
wheel wells and walls. (See Figure H.)
Wheel
Wells
Load Sheet
KEEP
CLEAR
KEEP
CLEAR
Figure H
9. Secure Roller Bar with hook-and-loop straps:
a. Attach straps to each other to make one strap.
b. Feed strap through Crank Slot, around
Bracket, then tightly secure ends together.
WARNING! Secure Roller Bar before driving.
Failure to secure Roller Bar may cause Load Sheet
to billow while driving, causing a traffic hazard.