Product manual

Page 3For technical questions, please call 1-800-444-3353.Item 60800
SAFETYOPERATIONMAINTENANCE SETUP
IMPORTANT SAFETY INFORMATION
Read all safety warnings and instructions.
Failure to follow the warnings and instructions may result in serious injury.
Save all warnings and instructions for future reference.
Assembly Precautions
1. Assemble only according to these instructions
before use. Improper assembly can create hazards.
2. Wear ANSI-approved safety goggles during use.
3. Keep assembly area clean and well lit.
4. Keep bystanders out of the area during assembly.
5. Do not assemble when tired or when under the
influence of alcohol, drugs or medication.
6. Weight capacity and other product capabilities apply
to properly and completely assembled product only.
Use Precautions
1. Do not exceed rated weight
capacity of Cargo Unloader.
2. Do not exceed rated weight capacity of truck.
Refer to truck’s Gross Vehicle Weight Rating.
3. Set parking brake before unloading. Do
not unload while truck is moving.
4. Do not stand behind truck while unloading.
5. Do not force the crank while unloading. If load
does not move or crank is very difficult to turn,
see Unloading Troubleshooting section.
6. Close tailgate and make sure it latches
completely before loading.
7. Check local automotive regulations before
driving with unloader attached.
8. Wear ANSI-approved safety
goggles while unloading.
9. If stopping while unloading, let up
pressure on handle before letting go.
10. Make sure unloading area is clear of people
and other objects before unloading.
11. Secure Roller Bar before driving. Failure to
secure Roller Bar may cause Load Sheet to
billow while driving, causing a traffic hazard.
12. This product is not a toy. Do not allow
children to play with or near this item.
13. Use as intended only.
14. Inspect before every use; do not use
if parts are loose or damaged.
15. No alterations shall be made to this product.
16. Maintain product labels and nameplates.
These carry important safety information.
If unreadable or missing, contact
Harbor Freight Tools for a replacement.
SAVE THESE INSTRUCTIONS.
Specifications
Weight Capacity 2,000 lb.
Load Sheet 50"W x 180"L
Roller Bar 68"W