Product manual

ManualsBrandsHarbor Freight Tools ManualsMachine ShopHarbor Freight Tools Stand for Shrinker and Stretcher Machines

SHRINKER AND STRETCHER

STAND

Model

96008

ASSEMBLY AND OPERATION INSTRUCTIONS

Shrinker-Stretcher not included.

Due to continuing improvements, actual product may differ slightly from the product described herein.

3491 Mission Oaks Blvd., Camarillo, CA 93011

Visit our website at: http://www.harborfreight.com

TO PREVENT SERIOUS INJURY, READ AND UNDERSTAND

ALL WARNINGS AND INSTRUCTIONS BEFORE USE.

2007 by Harbor Freight Tools

manual or any artwork contained herein may be reproduced in any shape or form

without the express written consent of Harbor Freight Tools.

Summary of content (8 pages)

PAGE 1
shrinker and stretcher stand Model 96008 Assembly And Operation Instructions Shrinker-Stretcher not included. Due to continuing improvements, actual product may differ slightly from the product described herein. ® 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com To prevent serious injury, read and understand all warnings and instructions before use. Copyright© 2007 by Harbor Freight Tools®. All rights reserved.
PAGE 2
Specifications For Use With SKU 95062 Manual Shrinker Stretcher Overall Height 41-7/8” Main Post 3-1/4” x 1-5/8” rectangular stock Mounting Plate 16-1/2” L x 7-1/2” W x 3/8” Thick Leg Separation 27-1/8” Leg Width 26-1/8” Foot Pads Distance from Ground 1 Ft. Net Weight 74.7 Lbs. Foot pedal operation allows you to keep both hands free for handling the work piece.
PAGE 3
4. Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair can be caught in moving parts. 5. Do not overreach. Keep proper footing and balance at all times. Proper footing and balance enables better control of the Shrinker Stretcher in unexpected situations. 6. Use safety equipment. Always wear eye protection. Nonskid safety shoes, hard hat must be used for appropriate conditions.
PAGE 4
17. Make certain that the work area is large enough so that the Shrinker Stretcher Stand and the workpiece are clear of any walls, furniture and obstacles. 18. Only use this Stand with SKU 95062 Manual Shrinker Stretcher. Assembly instructions Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual. 1. Connect each Wheel (6) to Support (4) with Pin (7) and Cotter Pin (8). 2.
PAGE 5
. Secure Shaft (14) to Pedal (3) with Pin (9), and Lock Pin (17). 6. Attach Springs (11) to Pedals (3) and Stand (1) as shown in Figure 2. Figure 3 95062 Manual Shrinker Stretcher Frame (1) table Bolt (included with SKU 95062) 7. To connect each Shrinker-Stretcher to the Stand, two Bolts are inserted through the underside of the Frame (1) table and threaded into the bottom of each ShrinkerStretcher-see Figure 3. All four Mounting Bolts are included with SKU 95062. 8.
PAGE 6
2. To activate each Shrinker-Stretcher, press down on the Pedal with your foot. INSPECTION, MAINTENANCE, AND CLEANING 1. BEFORE EACH USE, inspect the general condition of the tool. Check for loose screws, misalignment or binding of moving parts, cracked or broken parts, and any other condition that may affect its safe operation. Do not use damaged equipment. 2. Clean the Shrinker and Stretcher Stand with warm water and a soft cloth.
PAGE 7
parts and assembly diagram 19 18 17 SKU 96008 For technical questions, please call 1-800-444-3353.
PAGE 8
LIMITED 90 DAY WARRANTY Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.